WNDAP350 Prosafe Netgear wireless access point is a dual-band access point which can be configured for point-to-point, point-to-multipoint, repeater, simultaneous wireless bridge and access point mode, and WDS mode.

In business networks, wireless access point is used for extending the network wirelessly. With your growing business, you should choose the wireless access points which can be operated in varieties of wireless operation modes to satisfy your growing networks. The access points should support high-bandwidth and high-speed for your high-intensive business application needs. Power over Ethernet (PoE) feature would be much advantageous for deployment in area where power outlets are not available yet. WNDAP350 Prosafe Netgear wireless access point is an ideal solution for your growing businesses with full rich features.

What this Product Does

WNDAP350 Prosafe Netgear wireless access point is powered by Wireless N standards with Concurrent dual band operation in 2.4 GHz and 5 GHz radio band with quality of service for high-performance network and maximum wireless throughput. WNDAP350 supports advanced security features including WPA, WPA2, rogue AP detection and 802.1x with RADIUS for your wireless security protection. It also supports Wireless access control to identify authorized wireless network devices, MAC address authentication, VPN pass-through support, SSH, and SSL for remote management login (through Web browser, SNMP or telnet).

For deployment in areas where power outlets are not available yet, this Netgear wireless access point supports power over Ethernet (PoE) for optimal placement of access point such as in ceilings. With plenum-rated, the Netgear access point is ideal for safe and convenient placement above drop-down ceilings. And the good thing is that the access point with metal case includes Kensington lock slot for anti-theft.

Deployments

WNDAP350 Prosafe Netgear wireless access point is ideal solution for your growing businesses. The device can be operated in wide range of wireless operation modes including the following:

• Point-to-point wireless bridge mode
• Point-to-multipoint wireless bridge mode
• Repeater mode
• Simultaneous wireless bridge and access point mode
• Wireless Distribution System (WDS)

With Point-to-point wireless bridge mode you can connect two separate buildings wirelessly. On the other words, you can connect two separated LAN networks with wireless bridging. And with point-to-multipoint operation modes, you can configure the WNDAP 350 in one LAN network to connect to multiple LAN networks wirelessly.

In simultaneous wireless bridge and access point mode is almost the same as the wireless bridge mode but the device can also provide wireless access to the wireless clients. In bridge mode, the devices do not provide wireless access to the clients.

In repeater mode, you can place the WNDAP350 in location with dead spots area. In WDS modes, you can configure multiple access point devices to create large wireless networks without the need of backbone cables.

WNDAP350 Prosafe Netgear wireless access point with its full rich features is an ideal solution for your growing businesses for wireless access to the clients.

See also:

• DGN3500 Wireless Gateway Router is all-in-one device featuring Gigabit Ethernet ports; share USB Storage, and with built-in DSL Modem
• How to choose the best wireless access point
• Major different between wireless access point Vs wireless routers
• WNDR3400 N600 Netgear wireless dual band router
• Zyxel WAP3205 wireless Ethernet bridge